With the new optimizations applied to the i965 driver it becomes
a requirement to specify buffers as coherent if the access is declared
as such. This fixes a regression with
dEQP-GLES31.functional.synchronization.in_invocation.ssbo_alias_overwrite
Closes#93
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Given a source and destination image, consider the following sequence
of events:
1) glTexImage with src
2) virgl_resource_copy_region copies src to dst using GL
3) mesa attempts to readback dst, which returns the correct
result with vrend_transfer_send_getteximage only
Commands that reproduce this scenario on i965/qemu:
./bin/arb_copy_image-formats -auto
./bin/fbo-generatemipmap-formats GL_ARB_texture_float -auto
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Closes: #74
v2: * Enable enhanced layouts in the guest only when the host supports
it, because with indirect arrays enabled we re-emit the layout
the guest send.
* enable indirect arrays independently from the host capabilities
(following Eriks comments)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Gurchetan Singh <gurchetansingh@chromium.org>
Also check for GL_EXT_polygon_offset_clamp when deciding whether the
corresponding virgl feature is supported. This enables D3D11 in guest
Wine (and thus Steam/Proton), when running on GLES hosts that support
this extension.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This will speed-up the compilation time.
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Run GL 3.0, 3.1 and 3.2 tests in CI runs. Also add expected results
for these runs in ci/previous_results.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Add test script flags to run desktop GL 3.0, 3.1 and 3.2 tests.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Build CTS with support for both EGL and GLX, so that we can run both
GLES and desktop GL tests.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This is useful for knowing if we can expose
KHR_texture_compression_astc_sliced_3d in the guest.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
We should also check for S3_s3tc to detect S3TC texture compression
support.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The piglits and KHR tests that use TF3 (i.e. multiple output
streams) tend to hang, and since the GLES host doesn't support
this but we lie about the GLSL version it is better to signal
the guest correctly that this is not supported.
v2: Set flag only on caps v2 code path, otherwise we might read
from uninitialized memory
v3: Increment feature check version to indicate that the TF3
feature flag is valid.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
In order to properly propagate the output masks to the inputs of the next
shader the shader slection has do be done in the order the shaders will be
called later.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
This is useful to avoid unsupported format-conversions on GLES.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This code-path is never going to work on GLES, so let's avoid trying.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This just removes some duplicate complexity, and adds a few asserts to
notice format-list mismatches earlier.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This adds the support for ARB_indirect_parameters extension
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The mesa state tracker can emulate this, but we should pass
it through properly to the host in case it has a more efficent path.
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When I added indirect draw support, I forgot to add support
for the binding flag for command args, we need this later,
but in order to introduce support without breaking things,
we should fix the bug first and add a separate cap for it.
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we add new feature checks on the host side that is used to enable
a cap conditionally in the guest that was enabled unconditionally before
we might end up with a feature regression when a new mesa version is
used with an old virglrenderer version that doesn't check for that cap.
To work around this problem add a version id to the caps that corresponds
to the features that are actually checked on the host so that it can be
checked in the guest whether this cap was actually checked for or whether
it should be enabled unconditionally.
The id should be incremented whenever a new feature check is added that
might result in a feature regression in the guest when run on an old host.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Pohsien Wang <pwang@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We don't have an --use-egl option, we have a --use-gles option. This was
simply a typo when I updated the string last.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Update Mesa to a commit enabling virgl on softpipe to advertise
GL 3.x and beyond. This will allow us to support desktop GL CI tests
in upcoming commits.
This newer Mesa version also fixes a few gles31 tests, so update results
in the ci/previous_results directory accordingly.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
We support only three mode of mip filter:
PIPE_TEX_MIPFILTER_NONE
PIPE_TEX_MIPFILTER_LINEAR
PIPE_TEX_MIPFILTER_NEAREST
Add check to prevent it fall down to other senarios.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This avoids a potential race when multiple pipelines are running in
parallel and could update/overwrite the ':latest' tag.
For example, with two pipelines, A and B, the following could occur:
A1 -> build image and update :latest tag to digest DigestA
B1 -> build image and update :latest tag to digest DigestB
A2 -> use image from :latest tag assuming it's DigestA, but it's
actually DigestB
...
Explicitly using the image digest avoids the problem:
A1 -> build image with digest DigestA and update :latest tag
B1 -> build image with digest DigestB and update :latest tag
A2 -> use image with digest DigestA
B2 -> use image with digest DigestB
...
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
On GLES Mesa rejects arrays of arrays as TCS and TES shader inputs and outputs.
This is based on section 4.3 of the GLSL 3.20 ES standard where an error should be
produced for "Per-vertex-arrayed arrays of arrays" and "For non-per-vertex-arrayed
array of arrays", so apparently something like
in vec4 [][N];
is not allowed and on GLES interface blocks have to be used instead. In addition the
code needed some fixups when interface blocks are used.
v2: Emit correct type for elements in blocks
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
The shaders are issued backwards starting from the fragment
shader and, therefore, in the first pass when we fill out
the shader keys for the TES no TCS will be present.
So don't bail out in this case and assume there is a VS.
Later, when the VS shader is compiled it will check whether
a TES is present without a TCS and report the error.
Fixes: 956a6ceb8d
shader: Pass information about the layout of generics and patches to the next stage
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
This is not legal. This fix help with "The Talos Principle" that triggers
emitting an invariant shader.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Our current CI setup doesn't specify a proper dependency between the
build and test CI stages for merge requests, since the test stage jobs
are triggered on 'merge_requests' whereas the build stage jobs are not.
This leads to both build and test jobs starting in parallel for merge
requests, potentially leading to the tests running with an older docker
image.
This patch triggers the build stage jobs on 'merge_requests' ensuring
correct dependencies.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
This fixes most of the piglit:
arb_shader_image_load_store-qualifiers
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
With GLSL ES a format layout is requires, and with GL it doesn't hurt to
add it, so always emit rgba32f when no format is given.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
On GL WR translates to writable, but on GLES we translate this
to writeonly because for most formats one has to specify one or
the other, so if we have an image with the TGSI WR specification,
and read from it, we drop the Writable flag. For the images that
allow RW this is of no consequence, and for the others a write
access will fail instead of the read access, but this doesn't
constitue a regression because we couldn't do both - read and
write - anyway.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Update the mesa version and correct the sRGB write control tests
and frexp since this is now supported on softpipe.
v2: ci: Correct results for srgb_r8 that was enabled for GL too
ci: Use mesa version that supports mixed color FBO attachments
with softpipe
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Softpipe doesn't support ARB_GLES3_1_compatibility but can support
NV_shader_atomic_float and this is needed for some dEQP-GLES31 tests to be
run on a softpipe GL host.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
(u|i)mulExtended are provided by ARB_gpu_shaders5 but also by
MESA_shader_integer_functions and only the latter is supported by softpipe
so fall back to this extension if needed.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This is needed for using the right extension in the shaders.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This is not required and actually an error.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: <Gurchetan Singh gurchetansingh@chromium.org>
Fixes 1D part of piglits of: bin/arb_shader_image_size-builtin
(The tests require glViewportIndexedfv enabled with !182)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Fixes: KHR-GL33.texture_size_promotion.functional
v2: Put bias at right position when offset is present
Fixes piglit: texelFetch offset 140 fs isampler2DRect
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Fixes piglits on GLES host:
tex-miplevel-selection * 1D*
The only piglits that are not fixed from the tex-miplevel-selection
are those including sampler1DArrayShadow. emulating these by using
sampler2DArrayShadow is not always possible, because GLSL doesn't
provide the required overloads.
Namely textureOffset, textureLod, textureLodOffset, and texture with
bias parameter are not available.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
samplers on GLES
Since the sampler is emulated by a 2D sampler the offset must also be a
2D vector and the coordinate argument must be ivec2.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Since the 1D texture arrays are emulated by using 2D texture
arrays the number of array layers is in the z component.
Fixes piglits on GLES:
textureSize * *sampler1DArray
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
These textures are emulated by 2D textures and textureSize needs the swizzle
for the result to be assignable to a float value.
Fixes piglits on GLES hosts:
textureSize * *sampler1D
textureSize * *sampler1DShadow
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
On GLES GL_EXT_disjoint_timer_query provides this functionality, so we
should make use of it.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Elie Tournier
Gert Wollny
Gurchetan Singh
Alexandros Frantzis
Erik Faye-Lund
Dave Airlie
Po-Hsien Wang